Assembly; Using Your Vacuum; Automatic Cord Rewind - Bissell POWERLIFTER 3404 User Manual

Assembly

Go to support.BISSELL.com for assembly videos.
1.
Insert handle into body until
it clicks into place.
4.
Attach hose clip to the body
of the vacuum by clicking it
into place.

Using Your Vacuum

For additional ways to use your vacuum's features, check out support.BISSELL.com.
1.
Power ON ( ) . Turn the
brush roll ON (
cleaning and OFF (
vacuuming hard or delicate
surfaces like hardwood, tile,
small rugs, or frieze carpets
with long fibers.

Automatic Cord Rewind

If you have trouble with this feature, see our troubleshooting videos on support.BISSELL.com.
1.
Gently pull the cord out. Do
not pass the red mark on the
cord. Plug cord into an outlet.
2.
Attach hose to wand by
twisting clockwise.
5.
The hose should sit on the
vacuum without any twists as
pictured.
2.
Step gently on base and pull
the handle back to recline.
) for carpet
) when
Note: The brush roll shuts
OFF when vacuum is locked in
upright position.
2.
To retract, hold the plug
and press the automatic cord
rewind button.
3.
Attach hose to back of
vacuum by twisting clockwise.
6.
Attach tools to tool holders
on vacuum.
3.
Use the carpet type control
for optimized cleaning on
high pile and low pile carpet.
The control can be moved
to the middle position for
medium pile carpeting.
3.
If cord doesn't fully retract,
pull some of the cord out and
press the button again.
BISSELL.com 3