Dometic CF16 Operating Manual page 12

Operation
➤ Plug the AC connection cable (fig. 6 3, page 3) into the AC voltage socket of
the cooler (fig. 3 1, page 2).
➤ Connect the connection cable to the AC power outlet.
6.5 Secure the cooling device in the vehicle (CF11)
➤ Open the lid of the cooling device.
➤ Place the safety strap into the guide (fig. 6 1, page 3) of the cooling device.
➤ Close the lid.
➤ Engage the safety strap and tighten it.
6.6 Switching on the cooling device
A
NOTICE! Risk of damage!
• Always ensure sufficient ventilation so that the heat generated during
operation can dissipate. Ensure that the ventilation slots are not
covered. Make sure that the device is sufficiently far away from walls
and other objects so that the air can circulate.
• Ensure that the items placed in the cooler are suitable for cooling to
the selected temperature.
• Disconnect the cooler and other electric consumers from the battery
before you connect the battery to a quick charging device. Overvolt-
age can damage the electronics of the device.
For safety reasons, the cooler is equipped with an electronic system to prevent the
polarity being reversed.This protects the cooler against reversed polarity when
connecting to a battery and against short circuiting.
fig. 1, page 2, fig. 2, page 2
➤ Press the ON/OFF button (1) for three seconds.
✓ The "POWER" LED (2) is lit green.
Once the cooling device has reached the saved temperature, the LED lights up
orange.
✓ The display (5) switches on and shows the current interior temperature.
✓ The cooler starts cooling the interior.
12
CoolFreeze
EN