Table of Contents
Advertisement
FUEL FILLER LID
The fuel filler lid is located toward the rear of the
passenger side. To open the lid:
1. Make sure your Subaru is stopped and the select
lever is placed in the "P" position. Then, turn the
ignition to the off position.
2. The fuel filler lid is unlocked by using the unlock
switch in the door, access key fob, or door handles.
3. Push the rear side of the lid.
4. When the lid opens slightly, open it further by hand.
While refueling, place the fuel filler cap on the cap
holder inside the lid.
After refueling, put the cap back on and turn it
clockwise until you hear a clicking noise. Be certain
not to catch the tether under the cap while tightening.
To close the lid, press it until you hear it latch.
NOTE: The Check Engine warning light may illuminate if the fuel filler cap is not tightened
properly.
FUEL SPECIFICATIONS AND CAPACITY
2.5L Engine Fuel Specifications and Capacity
Fuel Octane Rating
Ethanol Content Limit
Fuel Tank Capacity
Low Fuel Warning Light
2.4L Engine Fuel Specifications and Capacity
Fuel Octane Rating
Ethanol Content Limit
Fuel Tank Capacity
Low Fuel Warning Light
REFUELING
Fuel Filler Lid and Cap
87 AKI or higher
No more than 10%
18.5 US Gallons
2.6 US Gallons
87 AKI or higher
No more than 15%
18.5 US Gallons
2.6 US Gallons
43
Advertisement
Table of Contents
