Memory Driver's Seat - Subaru Legacy 2024 Getting Started Manual

MEMORY DRIVER'S SEAT (if equipped)
You can set the seat and outside mirror position and retrieve them
using the buttons on the driver's door or the access key fob. You
can learn more about setting and retrieving your seat and mirror
positions from the how-to video linked in the QR code and the
following steps.
To set a seat position with a
button:
1. Make sure the select lever is in
the "P" position, with the
parking brake applied and the
ignition in the "ON" position.
2. Adjust your seat and outside
mirrors to the desired position.
3. Register the position by either
of the following procedures:
• Press the "SET" button, and then
press and hold either button "1"
or "2". A chirp sounds when the
position is registered.
• While holding the "SET" button,
press and hold either button "1" or "2". A chirp sounds when the position is registered.
To retrieve the seat position set with a button:
1. Turn the ignition switch to "ON".
2. Put the select lever in the "P" position and apply the parking brake. Then, press button "1"
or "2". The seat and outside mirrors are automatically recalled to your preferred positions.
To set a seat position with the access key fob:
1. Make sure the select lever is in the "P" position with the parking brake applied and the
ignition "OFF".
2. Adjust your seat and outside mirrors to the desired position.
3. While holding the "SET" button, press and hold the unlock button on the access key
fob. A chirp sounds when the position is registered.
To retrieve the seat position set with the access key fob:
1. Hold the access key fob.
2. Unlock and open the driver's door. The seat and outside mirrors are automatically
recalled to your preferred positions.
HOW TO APPENDIX
Memory Seat Buttons
131