Configuration Procedures - Linux Environments; Prerequisites - HP StorageWorks Modular Smart Array 1500 cs Installation Manual

Configuration Procedures -
Linux Environments
Deploying the MSA1500 cs in a Linux environment involves:
1.
2.
3.
4.
5.
Each of these procedures is discussed in the following paragraphs.
Note:
and in chapter 1 of this guide. There are specific dependencies and if you deviate from
this sequence, you may have to uninstall and then reinstall your MSA1500 cs.

Prerequisites

Modular Smart Array 1500 cs Installation Guide
Completing all Prerequisites, page 65
Installing the HBA Driver on your Linux
Installing the ACU on your Linux management server
Installing Insight Manager on your Linux servers
Configuring the storage, page 71
HP recommends installing your MSA1500 cs in the sequence of steps listed here
Install and connect all equipment correctly, as detailed
Procedures - All Deployments" on page 15.
Host computer must have the supported kernel source and kernel headers
installed.
If using the ACU, install Netscape Navigator, version 6.2 or greater or
Mozilla, version 1.0.2 or greater with Personal Security Manager
Obtain the documentation for the storage configuration tool you plan to use.
Documentation for the ACU and the CLI are available on the MSA1500 cs
Documentation CD.
servers, page 66
(optional), page 68
(optional), page 69
in"Installation
3
65