Table of Contents
Advertisement
Product Updates
On your computer, install Garmin Express
(www.garmin.com/express).
™
This provides easy access to these services for Garmin
devices:
®
• Software updates
• Product registration
Setting Up Wi‑Fi
for the Dog Collar Device
®
When paired with a navigator that supports the setup of Wi‑Fi technology on a dog collar device, the dog
collar device can scan for nearby Wi‑Fi networks and pair to a selected network. When the dog collar device is
connected to a Wi‑Fi network, it automatically checks for available software updates and installs them when the
dog collar device is charging, and in range of the connected Wi‑Fi network.
1 Select Dog List.
2 Select a dog.
3 Select
> Collar Wi-Fi Setup, and follow the on-screen instructions.
Setting Up Garmin Express
1 Connect the device to your computer using a USB cable.
2 Go to garmin.com/express.
3 Follow the on-screen instructions.
Connecting the Dog Collar Device to a Computer
NOTICE
To prevent corrosion, you should dry the contacts on the dog collar device and the surrounding area before
connecting the charging clip.
1 Snap the charging clip onto the dog collar device.
2 Plug the small end of the USB cable into the USB port on the charging clip.
3 Plug the other end of the USB cable into a USB port on the computer.
VHF Radio Information
This product may be used only on specific radio frequencies, which vary depending on the country of use. The
navigator and dog collar device allow the user to install a different antenna. Changing the antenna can result in
improved radio performance and higher radiated power. You must not use the device with a third party antenna
or an antenna not approved by Garmin. Go to
www.garmin.com/tracking-legal
for details about the performance
and radio frequency of this product, lawful accessories, and power limits for countries.
Device Information
7
Advertisement
Table of Contents
