Daikin FTXG20LV1BS Installation Manual page 13

Indoor Unit Installation
6.
Wiring
With a multi indoor unit
unit.
1) Strip wire ends (15mm).
2) Match wire colours with terminal numbers on indoor and outdoor unit's terminal blocks and firmly screw wires to the
corresponding terminals.
3) Connect the earth wires to the corresponding terminals.
4) Pull wires to make sure that they are securely latched up, then retain wires with wire retainer.
5) In case of connecting to an adapter system, run the remote controller cable and attach the S21.
6) Shape the wires so that the service lid fits securely, then close service lid.
CAUTION
When connecting the connection wires to the terminal block using a single core wire,
be sure to perform curling.
Problems with the installation may cause heat and fires.
WARNING
• Do not use tapped wires, extension cords, or starburst connections, as they may cause overheating, electrical shock, or fire.
• Do not use locally purchased electrical parts inside the product. (Do not branch the power for the drain pump, etc., from the
terminal block.) Doing so may cause electric shock or fire.
• Do not connect the indoor unit to the mains electricity. Connect it to the outdoor unit only or there may be danger of electric
shock or fire.
Wiring diagram
: Terminal strip
: Connector
BLK : Black
BLU : Blue
BRN : Brown
GRN : Green
PNK : Pink
Notes
: Refer to the nameplate of the unit for power requirements.
: INDOOR
: OUTDOOR
: TRANSMISSION CIRCUIT
: INTELLIGENT EYE SENSOR
: WIRELESS REMOTE CONTROLLER
: SIGNAL RECEIVER
■
English
, install as described in the installation manual supplied with the multi outdoor
Terminal block
Electrical component box
1 2 3
Shape wires so that the
service lid will fit securely.
Firmly secure wire retainer
so that wires sustain no
external stress.
Wire retainer
Use the specified wire type.
Firmly fix the wires with
the terminal screws.
Inter-unit wire
4-core 1.5mm
H05RN
1
Indoor
2
3
unit
: Connection
: Field wiring
ORG : Orange
RED : Red
WHT : White
YLW : Yellow
Indoor
Outdoor
Transmission circuit
Intelligent eye sensor
Wireless remote controller
Signal receiver
Outdoor
unit
1 2 3 L N
or more
2
Firmly fix the wires with
the terminal screws.
<Good> <Wrong>
11