Advertisement
If you are using an E ngage
You will need to access the voice-guided menu as per above, use the call button to toggle through the
different options until you hear Hook Lifter type.
Once you hear this use the volume up/down buttons to cycle through the options till you hear Jabra IQ.
Then use the Call button to accept this setting and move on. Then press and hold the volume up and
down button to exit the settings menu and save changes. Place headset back onto the base which will
restart.
If you are using an E ngage
The easiest way to change settings on the Engage 75 headset is via the Jabra direct software.
This is free to download from
Once this has been downloaded and your headset is plugged into the PC you will be able to go directly
into the headset settings and select the EHS/Hook lifter type. In this case you would need to select Jabra
IQ.
65
follow these instructions :
75
please use these instructions:
h ttps://www.jabra.com.au/software-and-services/jabra-direct
Tried everything and still not working?
Call Our Friendly Experts
1300 889 728
Advertisement
