Advertisement
Quick Links
How do I connect my Jabra wireless headset with the Jabra
Link 14201-10 to my Aastra desk phone so I have remote call
control using my headset?
Jabra Motion Office
Prerequisites
Jabra Link 14201-10
DHSG connection cable from Aastra
Connection:
1. Connect the AC adapter that is supplied with the headset to the
headset base, and connect the other end to an electrical outlet.
2. Connect the Jabra Link 14201-10 EHS cable with the red band to the
AUX interface on the headset base, and connect the end with the blue
band to the headset base socket that is marked with a phone icon.
3. Connect the Jabra Link 14201-10 EHS cable single end to the RJ45
adapter that is supplied with your Aastra DHSG Cable Kit.
4. Connect the Aastra DHSG Cable Kit cord with the blue band to the
RJ45 adapter. Connect the Aastra DHSG Cable Kit cord with the green
band to the headset interface on the Aastra desk phone, and connect
the end with the yellow band to the socket for the Aastra phone
expansion module.
https://www.jabra.ca/supportpages/jabra-motion-office/6670-904-105/faq/4428a7d3-
b71c-4803-9020-b38c440a375b
07/04/2021 14:37
Page 1 of 2
Advertisement
Related Manuals for Jabra Link 14201-10
Summary of Contents for Jabra Link 14201-10
- Page 1 1. Connect the AC adapter that is supplied with the headset to the headset base, and connect the other end to an electrical outlet. 2. Connect the Jabra Link 14201-10 EHS cable with the red band to the AUX interface on the headset base, and connect the end with the blue band to the headset base socket that is marked with a phone icon.
- Page 2 Refer to your phone or IT support for assistance. 2. Follow the setup instructions for your Jabra wireless headset. If the headset base requires manual configuration, set the Electronic Hook Switch setting to “DHSG” and set the dial tone switch to position “A”.