Other Related Information; For Units Set At 115 V - Magnavox 17MF200V Owner's Manual

An after-image appears
An afterimage remains after the power
has been turned off.
Green, red, blue, dark and white dots
remain.
TV and Audio Problems
Poor TV signal reception
No TV picture
No sound
For further assistance, contact your local distributor.

Other Related Information

For units set at 115 V :

Use a UL Listed Cord Set consisting of a minimum 18 AWG, Type SVT or SJT three conductor cord a maximum of
15-feet long and a parallel blade, grounding type attachment plug rated 15 A, 125 V.
•
If an image remains on the screen for an
extended period of time, it may be imprinted in
the screen and leave an afterimage. This
usually disappears after a few hours.
•
This is characteristic of liquid crystal and is not
caused by a malfunction or deterioration of the
liquid crystal. The afterimage will disappear after
a period of time.
•
The remaining dots are normal characteristic of
the liquid crystal used in today's technology.
•
The proximity of mountains or high buildings
may be responsible for ghost pictures, echoing
or shadows. In this case, try manually adjusting
your pictures: see 'fine tuning' or adjust the
direction of the outside aerial.
•
Have you connected the aerial socket properly?
Have you chosen the right system? Poorly
connected aerial sockets are often the cause of
picture or sound problems (sometimes the
connectors can become half disconnected if the
TV set is moved or turned). Check all
connections.
•
Ensure that the audio cables are firmly
connected to both the audio input connectors on
your TV and audio output connectors on your
PC or Video player.
15