Remote 14 Receptacle Rc8 Information - Miller Deltaweld Series Owner's Manual

5-8. Remote 14 Receptacle RC8 Information

24 VOLTS AC
REMOTE OUTPUT CONTROL
GND
REMOTE POWER ON/OFF
REMOTE VOLTAGE SENSING
* Not Used
Notes
.
A complete Parts List is available at www.MillerWelds.com
Socket
A 24 volts AC. Protected by supplementary protector CB2.
B Contact closure to A completes 24 volts AC contactor control circuit.
C Command reference; 0 to +10 volts DC.
D Remote control circuit common.
E 0 to +10 volts DC input command signal from remote control.
F Current feedback; 1 volt per 100 amperes.
H Voltage feedback; 1 volt per 10 arc volts.
K Chassis common.
G Circuit common for 24 and 115 volts AC circuits.
To remote On/Off switch.
*
* Voltage sensing signal from Negative (−) weld output terminal.
* Voltage sensing signal from Positive (+) weld output terminal.
Information
Work like a Pro!
Pros weld and cut
safely. Read the
safety rules at
the beginning
of this manual.
OM-223 Page 19