Philips 230WP7NS User Manual page 9

Product Information
• Power consumption
• Temperature
• Relative humidity
• System MTBF
• Cabinet color
• Altitude
- storage/shipment
- operating
* This data is subject to change without notice.
* Resolution 1920 x 1200, standard size, contrast max., brightness 50%, 6500° K, full white pattern.
Pin Assignment
1. The DVI connector contains 24 signal contacts organized in three rows of eight contacts. Signal pin assignments are
listed in the following table:
Pin
Signal Assignment
No.
1 T.M.D.S. Data2-
2 T.M.D.S. Data2+
T.M.D.S. Data2
3
Shield
NC
4
NC
5
6 DDC Clock
DDC Data
7
8 * Analog V-sync
2. The 15-pin D-sub connector (male) of the signal cable:
file:///D|/My%20Documents/dfu/230WP7/english/230wp7/product/product.htm (4 of 9)2006-01-10 3:34:36 PM
80 W* (typ.)
5° C to 35° C (operating)
-20° C to 60° C (storage)
20% to 80%
50K hrs (excluding CCFL 40K hrs)
Black/Silver
0 - 40,000 feet (12,192m)
0 - 12,000 feet (3657.6m)
RETURN TO TOP OF THE PAGE
Pin
Signal Assignment
No.
9 T.M.D.S. Data1-
10 T.M.D.S. Data1+
T.M.D.S. Data1
11
Shield
NC
12
NC
13
14 +5V
Ground (return for
15
+5V and H/V-sync)
16 Hot Plug Detect
Pin
Signal Assignment
No.
17 T.M.D.S. Data0-
18 T.M.D.S. Data0+
T.M.D.S. Data0
19
Shield
20 NC
21 NC
T.M.D.S. Clock
22
Shield
23 T.M.D.S. Clock+
24 T.M.D.S. Clock-
Pin
Signal Assignment
No.
C1 * Analog R
C2 * Analog G
C3 * Analog B
C4 * Analog H-sync
* Analog GND
C5 (Analog R, G, B
return)