Safety And Troubleshooting Information - Philips 230WP7NS User Manual

Safety and Troubleshooting Information

Safety and Troubleshooting Information
• Safety
Precautions
and
Maintenance
• FAQs
Safety precautions and maintenance
• Troubleshooting
• Regulatory
Information
• Other Related
Information
Read and follow these instructions when connecting and using your computer monitor:
Operation:
file:///D|/My%20Documents/dfu/230WP7/english/230wp7/safety/safety.htm (1 of 2)2006-01-10 3:34:35 PM
WARNING: Use of controls, adjustments or procedures other than
those specified in this documentation may result in exposure to shock,
electrical hazards and/or mechanical hazards.
Keep the monitor out of direct sunlight and away from stoves or any other heat source.
Remove any object that could fall into ventilation holes or prevent proper cooling of the
monitor's electronics.
Do not block the ventilation holes on the cabinet.
When positioning the monitor, make sure the power plug and outlet are easily accessible.
If turning off the monitor by detaching the power cable or DC power cord, wait for 6
seconds before attaching the power cable or DC power cord for normal operation.
Please use approved power cord provided by Philips all the time. If your power cord is
missing, please contact with your local service center. (Please refer to Customer Care
Consumer Information Center)
Do not subject the LCD monitor to severe vibration or high impact conditions during
operation.
Do not knock or drop the monitor during operation or transportation.
Please note the above pictures if you lift your monitor, not following the
recommended way may cause injury.
Using two hands to lift your monitor is strongly recommended.