Jabra ENHANCE SELECT 100 Rx User Manual page 26

Placing the Phone Now magnet
Place the magnet on your telephone receiver as follows:
1. Clean the surface thoroughly. Use a
recommended cleaning agent.
CAUTION:
•
If you experience frequent signal loss or noise during calls, move the Phone Now magnet to another
place on the telephone receiver.
•
Only use magnets supplied by the manufacturer.
How to use Phone Now
1. Lift the telephone to your ear.
2. When you hear a short melody, the phone program is active.
26 Using a telephone
2. Remove the foil from the
magnet.
3. Place the magnet on the
phone.