VM0808 RS-232 Control Tool
EDID Mode
On the EDID Mode page, the following actions are possible:
Click on Port1 to implement the EDID of the connected display to
Port 1, and pass it to the video source.
Click Remix to use the EDID of each connected display according to
its connection when the VM0808 is first powered on, or immediately
after pressing ENTER to select the Remix option.
Click Auto to implement the EDID of all connected displays. The
VM0808 uses the best resolution for all displays.
Click Default(*) to implement ATEN's default EDID.
Click Send to send the command.
Extended Display Identification Data (EDID) is a data format that contains a
display's basic information and is used to communicate with the video source/
system. You can set up which EDID mode the VM0808 uses with the following
command:
EDID Command + Control (Port1 / Auto / Remix / Default) [Enter]
For example, to use the Port1 EDID setting, type the following:
edid port1 [enter]
12