Chapter 5. CLI Commands
Setting the EDID Mode
Function
Sets the VP3520's EDID mode.
Syntax
edid {port1|remix|default}
Parameters
port1: Set the VP3520's EDID mode to follow the display
connected to the output port A.
remix: Set the VP3520's EDID mode to remix with which the
system sends the optimum EDID of the connected displays to the
sources.
default: Set the VP3520's EDID mode to ATEN Default which
sends ATEN-predefined EDID to the connected sources (default).
Example
edid default
Configuring the Mute Function
Functions and Syntax
mute
mute {i<input_port>|i sys|i*}
mute {o<output_port>|o sys|o*}
mute {i<input_port>|i*} {on|off}
mute {o<output_port>|o*} {on|off}
Parameters
i<input_port>: Specifies an input port in two digits.
i sys: Refers to all audio inputs (source devices, line-in, and mic).
i*: Refers to all input ports.
o<output_port>: Specifies an output port in two digits.
o sys: Refers to all audio outputs (display devices and speakers).
o*: Indicates all output ports.
on: Mute the specified input / output ports.
62
Syntax
Function
Indicates the mute setting for each
input and output port.
Indicates the mute setting for the
specified input or output port.
Mutes / unmutes the audio of a
specified audio input or output.