Panasonic WV-Q123A Operating Instructions

Operating Instructions
Included Installation Instructions
Attachment Pipe Bracket
WV-Q123A
Model No.
(Fine Silver)
WV-Q179
(Light Gray)
Before attempting to connect or install this product,
please read these instructions carefully and save this manual for future use.
For U.S. and Canada:
Panasonic i-PRO Sensing Solutions
Corporation of America
800 Gessner Rd, Suite 700 Houston, TX 77024
https://www.security.us.panasonic.com/
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada
1-877-495-0580
https://www.panasonic.com/ca/
© Panasonic i-PRO Sensing Solutions Co., Ltd. 2019
Precautions for installation
We assume no responsibility for injuries or property damage resulting
from failures arising out of improper installation or operation inconsistent with
this documentation.
In order to prevent injury, the product must be securely mounted to the wall or
sealing according to the Installation Guide of the camera.
Mounting method for this product
This product is designed to be used as a pendant mount camera. If the product is mounted
on a desktop or at a slant, it may not work correctly and its lifetime may be shortened.
Make sure to remove this product if it will no longer be used.
Installation
The following explains an example of mounting the camera on a ceiling.
【1】Preparations before installation
Prepare the bracket (locally procured) for mounting
the camera.
IMPORTANT:
• The mount bracket (locally procured) should
have the configuration that enables fixation of
safety wire from camera.
【2】Fix this product to the mount bracket (locally procured).
①Fix this product to the mount bracket.
② Fill the gap between the mount bracket and this
product with waterproof material (locally procured)
such as silicon clay.
(Camera mounting image)
WV-Q123A
For Europe and other countries:
Panasonic Corporation
http://www.panasonic.com
Panasonic i-PRO Sensing Solutions Co., Ltd.
Fukuoka, Japan
Authorised Representative in EU:
Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, Germany
avs1019-0 PGQX2354ZA Printed in China
Safety wire
Mount bracket
(locally procured)
R 1-1/2, 11crest,
length MAX. 30 mm {1-3/16 inches}
(taper pipe thread)
RP 1-1/2, 11 crest,
deep MAX. 30 mm {1-3/16 inches}
(parallel pipe thread)
ø58 mm
{2-9/32 inches}
85 mm
This product
{3-11/32 inches}
Mount bracket
(locally procured)
➡
Waterproof material
(locally procured)
This product
Preface
This product is used to mount the camera on a locally procured mounting bracket.
For the latest information about the supported cameras, refer to our support website
(https://security.panasonic.com/support/info/ <Control No.:C0501, C0112>).
Standard Accessories
Operating Instructions (this document) ................................................................................ 1 pc.
Camera mounting screw (hexagon screw (M6)) ................................................................... 5 pcs.
Precaution
Refer installation work to the dealer.
Installation work requires technique and experience. Failure to observe this may cause fire, electric
shock, injury, or damage to the product.
Be sure to consult the dealer.
Do not use this bracket except with suitable cameras.
Failure to observe this may cause a drop resulting in injury or accidents.
Specifications
Ambient operating temperature: –50 °C to +60 °C {–58 °F to +140 °F}
Dimensions: ø58 mm × 85 mm (H)
{ø2-9/32 inches × 3-11/32 inches (H)}
Approx. 200 g {0.44 lbs}
Mass:
Finish: Aluminum die cast
【3】Fix the mount bracket (locally procured) on the installation surface.
① Pass the cables through the mount bracket.
② Fix a mount bracket to the installation surface by
using appropriate bolts, nuts or the like (locally
procured).
IMPORTANT:
• For details on procedure for attaching mount
bracket, read the operating instructions of
mount bracket.
• After waterproofing the hole for fixing mount
bracket and the port for pulling out the cable
on the installation surface, fix the mount
bracket on the installation surface.
• Ensure the minimum pull-out strength that
has sufficient allowance for total mass of
mount bracket, this product, and camera etc.
【4】Attach the camera to this product.
Connect each cable to the camera, and attach the camera to this product with the camera
mounting screw (accessory) or the hexagon screw supplied with the camera. Refer to the
Instruction Manual for details such as the recommended tightening torque for the camera mounting
screws.
(of them, 1 for spare)
Fine silver (WV-Q123A)
Light gray (WV-Q179)
port for pulling
installation
out the cable
surface
Hole for fixing
mount bracket
Mount bracket
(locally procured)
➡