Plasma tv wall-hanging bracket (adjustable angle type) (13 pages)
Summary of Contents for Panasonic WV-Q185
Page 1
Operating Instructions Included Installation Instructions Wall Mount Bracket WV-Q185 Model No. The bracket in the illustration is separately sold. Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. The model number is abbreviated in some descriptions in this manual.
CONTENTS Preface ......................................3 Precautions ....................................3 Precautions for installation ................................4 Parts and functions ...................................5 Installations/Connections ................................6 Specifications ..................................10 Standard accessories ................................10...
Preface This mount bracket is used for installing WV-Q186 (Mount bracket) or WV-Q187 (Mount bracket). Refer to the operating instructions of WV-Q186 or WV-Q187 for further information about the compatible camera models. Precautions Avoid installing this bracket in the locations where Refer installation work to the dealer.
Precautions for installation Panasonic assumes no responsibility for injuries or property damage resulting from failures arising out of improper installation or operation inconsistent with this documentation. Screw tightening Installation area for this product • The screws and bolts must be tightened with an appro- Consult the dealer about the installation area to select a strong wall area.
Step 3 Thread the cable through the slit cable cap and wall mount bracket (WV-Q185) successively. For the cable length that needs pulling out in advance, please refer to the operating instructions of WV-Q186 or WV-Q187.
Page 7
Step 4 Step 7 Seal the slit of the cable cap for the prevention of water For the installation method of WV-Q186 or WV-Q187 as well leakage. as the connection and storage of the cables, please refer to Outside the operating instruction of WV-Q186 or WV-Q187. Sealant (locally procured) Cable Cable cap (with a slit)
Page 8
■ When laying cables after drilling a hole through the wall Step 1 Step 2 Decide the mounting position, and drill a hole for a screw or Mount the cable cap (accessory) on the cable access hole an anchor and a hole for cable installation in the wall. (front).
Page 9
Thread the cables in the cable access holes in the wall After waterproofing the hole for fixing mount bracket, the through the slit cable cap and mount bracket (WV-Q185) port for pulling out the cable on installation surface, and the successively.
Specifications Ambient operating temperature: –50 °C to +60 °C {–58 °F to 140 °F} Dimensions: 120 mm (W) x 220 mm (H) x 269 mm (D) {4-23/32 inches (W) x 8-21/32 inches (H) x 10-19/32 inches (D)} Mass: Approx. 2 kg {4.42 lbs} Finish: Aluminum die cast Light grey Weight and dimensions indicated are approximate.