NOTE: For the location of server LEDs and information on their statuses, refer to the server documentation.
Possible causes:
Improperly seated or faulty power supply
•
Loose or faulty power cord
•
Power source problem
•
Power on circuit problem
•
Improperly seated component or interlock problem
•
Faulty internal component
•
Item
Refer to
1
"Component identification (on page 7)"
2
"General diagnosis flowchart (on page 66)"
3
"Loose connections (on page 64)"
4
Power Calculator on the HP website
(http://www.hp.com/go/bladesystem/powercalculator)
5
HP BladeSystem Maintenance and Service Guide located on the HP
website (http://www.hp.com/products/servers/proliant-bl/p-class/info)
6
Integrated Lights-Out User Guide located on the HP website
(http://www.hp.com/products/servers/proliant-bl/p-class/info)
7
Server maintenance and service guide located on the HP website
(http://www.hp.com/products/servers/proliant-bl/p-class/info)
Troubleshooting 69