- 2. The display of error code:
Press [Burst] , [MENU] and " [LEFT] of Cross key"
simultaneously with the step 1 condition.
The display is changed as shown below when the above
buttons is pressed simultaneously.
Normal display
display
Normal display
- 3. The change of display:
The error code can be memorized 32 error codes in sequence,
however it is displayed 5 errors on the LCD.
Display can be changed by the following procedure:
" [UP] or [DOWN] of Cross key": It can be scroll up or down
one.
" [LEFT] or [RIGHT] of Cross key": It can be display last 5
error or another 5 error.
- 4. How to read the error code:
One error code is displayed for 8 bit, the contents of error
codes is indicated the table as shown below.
Error code display
.....
Example of Error Code Display
17
Operation history