Toro Groundsmaster 4000 Series Installation Instructions Manual page 29

11
Connecting the Taillight
Harnesses
No Parts Required
Routing and Connecting the Left
Taillight
1. Unlatch and open the hood.
2. Route the 4-socket connector labeled LH R
L of the machine wire harness under the left
IGHT
frame rail and forward
Figure 69
1. 4-pin connector (labeled
LH Rear Lights—left
taillight harness)
2. Magnetic harness anchor
3. Adhere the magnetic harness anchor to the to
the frame rail (Figure
4. Route the 2-socket connector of the license-plate
light branch of the left taillight harness under the
hood and inboard
(Figure 69).
3. 2-socket connector
(license-plate light
branch—left taillight
harness)
69).
(Figure 69).
5. At the inboard side of the frame rail, remove
the cap from the 4-socket connector labeled LH
R L
EAR IGHT
70).
EAR
1. 4-socket connector
(labeled LH R
L —machine wire
IGHT
harness)
g351426
2. Cap
6. Plug the 4-pin connector labeled LH Rear Lights
of the left taillight harness into the 4-socket
connector labeled LH R
wire harness
Connecting the License Plate
Light
1. Insert the push-in anchor of the license-plate
light branch of the left taillight harness into the
g351444
hole in the left hood-hinge mount
29
of the machine wire harness
Figure 70
3. 4-pin connector (labeled
LH Rear Lights—left
EAR
taillight harness)
L
EAR IGHT
(Figure 70).
(Figure
g350866
of the machine
(Figure 75).