Handlebar Switches - Yamaha NIKEN 2019 Owner's Manual

Instrument and control functions
To unlock the steering
4
1
1. Push.
2. Turn.
From the "LOCK" position, push the
key in and turn it to "OFF".
(Parking)
The hazard lights can be turned on, but
all other electrical systems are off. The
key can be removed.
The steering must be locked before the
key can be turned to "
NOTICE
Using the hazard lights for an ex-
tended length of time may cause the
battery to discharge.

Handlebar switches

Left
1
2
6
1. "MENU" switch
2. "SELECT" switch
3. Cruise control switches
4. Horn switch "
EAU65680
5. Turn signal switch "
6. Dimmer/Pass switch "
".
ECA22330
EAU66055
2
3
5
4
"
/ "
/ /PASS"
4-2
Right
1
3
2
1. Stop/Run/Start switch " /
2. Drive mode switch "MODE"
3. Hazard switch " "
Dimmer/Pass switch "
Set this switch to " " for the high
beam and to " " for the low beam.
To flash the high beam, push the pass
side "PASS" of the switch while the
headlights are on low beam.
Turn signal switch " /
To signal a right-hand turn, push this
switch to " ". To signal a left-hand
turn, push this switch to "
released, the switch returns to the cen-
/ "
EAU73921
/ /PASS"
EAU66040
"
". When