Figure 2 Front Installation
Cleaning Instructions for Doors
Use a microfiber cloth and Windex
Original Glass Clean-
®
er or 36M003 Stove Bright
Glass Cleaner to clean the
®
door immediately after installation to remove acids de-
posited by the installer or technician. Spray the cleaner
onto the microfiber cloth and carefully wipe the entire
surface. The door should be cleaned in this manner an-
nually by the homeowner to remove fingerprints or other
contaminants. Once oxidations of the paint pigment has
occurred, cleaning will not restore the original color.
Please contact your Heat & Glo dealer with any
questions or concerns.
For the location of your nearest Hearth & Home
Technologies dealer,
please visit www.heatnglo.com.
Hearth & Home Technologies
7571 215th Street West, Lakeville, MN 55044
www.heatnglo.com
Heat & Glo • FS, IA, CHAF Decorative Front Installation Instructions • 2558-968 • 11/20
2