Heat & Glo Firescreen Installation Instructions

Firescreen, Iron Age, Chateau Forge Decorative Fronts for CERONA-IFT
Models: FS-C36, FS-C42, IA-C36, IA-C42, CHAF-C36, CHAF-C42
Leave this manual with party responsible for use
and operation.
CAUTION! Risk of Cuts, Abrasions or Flying Debris.
Wear protective gloves and safety glasses during instal-
lation. Sheet metal edges are sharp.
CAUTION! Do not install damaged components.
DANGER
DO NOT TOUCH GLASS
NEVER ALLOW CHILDREN
A barrier designed to reduce the risk of
burns from the hot viewing glass is provided
with this appliance and shall be installed for
the protection of children and other at-risk
individuals.
Installation
1. Remove decorative front from packaging.
2. The J-hooks are bent inward for protection during
shipping. Bend the J-hooks outward 90° so they
are positioned parallel to the sides of the front. See
Figure 1.
HHeat & Glo • FS, IA, CHAF Decorative Front Installation Instructions • 2558-968 • 11/20
Installation Instructions
HOT GLASS WILL
CAUSE BURNS.
UNTIL COOLED.
TO TOUCH GLASS.
Figure 1 Bending J-Hooks
3 Remove the Finishing Templates (if installed) from
the appliance. The finishing templates are included
with the appliance to ensure finishing material does
not prevent proper fitment of the front.
4. Locate the two vertical slots in the left and right
columns of the appliance. Grasp the top left and right
side of the front and engage the J-hooks into the
slots. See Figure 2.
1