Disassembly
3.3
Front Assy
Remove the four screws (T5)M1.6 by using a screwdriver
with Bits (T5).
Scrap! Not to be reused!
Remove the screw M1.4 by using a screwdriver with Bits
(Philip screw).
Scrap! Not to be reused!
There are eight snap hooks securing the Front Assy.
Insert a Front Opening Tool as shown in picture and gently
pull upwards to release the three hooks of this side.
1266-1672 Rev 3
©
Sony Mobile Communications AB – Company Internal
Working Instructions (mech)
7(39)