Replacement
4.13 RF Switch Mylar
Follow the 3.1 – 3.2 Disassembly instructions!
Carry out the Removal as described below.
Prepare a new RF Switch Mylar.
Carry out the Installation as described below.
Follow the 5.4 – 5.5 Reassembly instructions!
REMOVAL
Detach the RF Switch Mylar by using a Flex Film Assembly
Tool.
Scrap! Not to be reused!
INSTALLATION
Place a new RF Switch Mylar on its proper position as
shown.
Press to secure its attachment.
1266-1672 Rev 3
©
Sony Mobile Communications AB – Company Internal
Working Instructions (mech)
22(39)