LED Indicators
When the warning indicators (see below) light up or flash, the projector will
automatically shutdown. Unplug the power cord from the projector, wait for 30
seconds and try again. If the warning indicators light up or flash, please contact
your nearest service center for assistance.
Status and
Description
Standby State
(Power cord
input)
Power On
(Warming)
Power On and
Lamp Lighting
Power Off
(Cooling)
Error
(Lamp overheat)
Error
(Lamp failure)
Error
(Fan failure)
Error
(Overheat)
Power Indicator Light
Red
Steady Light
Flashing
(1 sec. off/1 sec.
on)
Flashing
(0.5 sec off/0.5
sec on)
Back to red
steady light
when the
cooling fan
turns off.
Temperature
Indicator Light
Blue
Steady Light
Steady Light
Steady Light
68
Light Source
Indicator Light
Red
Steady Light
Flashing
Red