Table of Contents
Advertisement
Controlling the Projector through a Network
The projector provides diverse networking and remote management features. The
LAN /RJ45 function of the projector, through a network, can remotely manage:
Power On/Off, Volume adjustment, Input select, Brightness, and more.
NOTE: Please ensure Network > Control > HTTP is enabled.
1. Connect the projector to a network via the LAN/RJ45 port.
2. Open the On-Screen Display Menu and go to: Network > LAN.
3. Select DHCP and turn it On to obtain an IP address automatically; or select Off to
enter the network information manually. (Press the MENU button to apply the
entered values.)
NOTE: Please wait for around 15~20 seconds, then re-enter the LAN settings
page. The Projector IP Address, Subnet Mask, Default Gateway, DNS
Server settings will be displayed. Make note of the IP address displayed
in the Projector IP Address row.
4. Using a web browser, and under the same network, type in the projector's IP
address.
5. Enter the user name and password, then click Log in.
NOTE: The default user name is admin.
LAN
Network Status
MAC Address
DHCP
IP Address
Subnet Mask
Gateway
DNS
i
Select
Network
C0:0A:A0:00:FB:00
190.000.0.100
250.000.000.0
190.000.0.200
190.000.0.20
Exit
Enter
57
Advertisement
Table of Contents
