Nameplate And Safety Decals - MULTIQUIP EM70SH5 Operation Manual

Plaster and mortar mixers

Hide thumbs

Table Of Contents

Table of Contents

The EM-70 plaster and mortar mixer is equipped with a number of safety decals. These decals are provided for operator

safety and maintenance information. Figure 1 below illustrates these decals as they appear on the machine. Should any

of these decals become unreadable, replacements can be obtained from your dealer or the MQ Parts Department.

WARNING

To avoid injury, you

understand operator's manual before

using this machine.

Keep safety grate, guards and doors

in place. Shut off engine or electric

motor before inspection or maintenance.

Moving parts can cut and crush.

SHUT OFF

before placing hands in mixing drum.

This machine to be operated by quali ed

personnel only. Ask for training as needed.

CABINET

REAR VIEW

PAGE 6 — EM70 SERIES PLASTER/MORTAR MIXERS • OPERATION MANUAL — REV. #2 (10/30/19)

MUST

read and

engine or electric motor

P/N 521229

SAFETY

INSTRUCTIONS

1. Read owner's manual

before operating.

2. Keep unauthorized and untrained

people away from machine during

operation.

3. Make sure all safety devices are in

place before this machine is started.

4. Make sure engine is turned off and

spark plug wire is disconnected before

cleaning the machine.

5. Keep hands and ngers away from

moving objects.

6. Do not operate machine in an enclosed

area, proper ventilation is required.

7. Never leave machine unattended when

operating.

8. Always stop engine and allow engine

to cool before adding fuel or oil.

MODEL

SERIAL NO.

Figure 1. Nameplate and Safety Decals