Verify System At Startup; Siem (Security Information And Event Management) Integration; Mcafee Embedded Control - Canon imageRUNNER ADVANCE DX 8700 Series Service Manual

Canon
IMPORTANT
In the event that the system administrator password becomes unavailable,
the password can be cleared by the service technician using service mode
if the Restrict Service Representation Access Function is set to 'Off'.
If the Restrict Service Representation Access function is set to 'On' or 'Off
(Auth. Needed)', then a license key is required to initialize the device
administrator password. The service technician will need to contact the
Technical Support Center to request a license key to initialize the device
administrator password (the device serial number is required). Once
entered, the license key will clear the administrator password from the
device. A new administrator password will need to be set.

3. Verify System at Startup

imageRUNNER ADVANCE DX machines now support Verify System at
Startup. Verify System at Startup uses RoT (Root of Trust) functions to
protect the device from unauthorized modification of the BIOS, firmware,
and applications. Verify System at Startup stops the unverified processes
and produces an error code for system servicing.
Note: Verify System at Startup is disabled by default and, when activated,
may increase device warm-up time by 20 to 40 seconds, depending on the
model.

4. SIEM (Security Information and Event Management) Integration

Enables the device to automatically send audit logs to SIEM systems for
analysis and detection of security violations. Examples of the audit logs
sent via the Syslog protocol (RFC5424 and RFC5426) include those for
user authentication, mailbox operation, network authentication, and print
jobs. Sending audit logs via TLS encryption (RFC5425) is also supported.

5. McAfee Embedded Control

Protects the machine's firmware, programs, and operating system from
potential threats and malware. All firmware and applications are checked
against a whitelist that enables only trusted firmware and applications to
launch. This helps to prevent malware, and mitigates zero-day attacks.
Note: This function is set to 'Off' by default, and must be set to 'On' within
the device settings. In addition, Verify System at Startup must be set to 'On'
within the device settings.
imageRUNNER ADVANCE DX 8700 Series Service Guide
Revision 7
imageRUNNER ADVANCE DX 8700 Series Service Guide
March 2023
Page 33