Philips HomeRun Aqua 3000 Series Manual page 20

2
1
Cleaning the side brush
6 Remove the hairs and dirt from the main brush.
Tip: Use the brush end of the cleaning tool to remove the dirt on the main
brush.
7 If you have removed the cap on the end of the main brush, push it back.
8 Install the main brush in the correct location. Match the square shaped peg
with the square shape hole and insert the brush into position.
9 Put the lips of the brush cover in the correct cutouts.
10 Push the brush cover in.
1 Put the robot upside down on a surface that is flat and stable.
2 Remove the side brush.
English
23