Polycom VSX Series Administrator's Manual page 97

© Polycom, Inc.
Setting Description
Monitor 2 Specifies the second monitor behavior:
•
VSX 6000
VSX 7000
•
VSX 8000
•
•
•
If you are using any configuration with two flat panel monitors, set
both monitors to 4:3 and select the JUST mode of display, so that
the image is not stretched and does not clip. Even though the flat
panels may be 16:9, you should select 4:3 so that both monitors
look the same.
PIP Specifies PIP (Picture-in-Picture) behavior:
•
•
•
•
Note: PIP settings are also available in the User Settings screen.
Users can turn the PIP on or off and change its location on the
screen using the PIP button on the remote control.
Graphics Specifies the monitor for displaying graphics content, when you are
Content Display using two monitors.
VSX 6000
Note: If the far site does not have dual-stream capability, content
VSX 7000
will appear on Monitor 1 at all sites.
VSX 8000
Display Icons in Specifies whether to display all on-screen graphics, including icons
a Call and help text, during calls.
Snapshot Lets you choose whether to have slides and snapshots time out,
Timeout after a period of four minutes.
Do not use this option if you want the user to control the return to
live video.
Dual Monitor Specifies whether both sites are displayed in a split-screen mode
Emulation when using one monitor.
Off — Select if you do not have a second monitor.
4:3 — Select if you are using a regular TV monitor as the second
monitor.
S-Video — Select if you have a second monitor connected to the
system's S-Video output using an S-Video cable.
Composite — Select if you have a second monitor connected to
the system using a composite video cable.
VGA — Select if you are using a VGA monitor as the second
display device.
Camera — The PIP window is displayed when the call is first
connected and when a user moves the camera, uses presets, or
switches to a different camera source.
On — The PIP window stays on for the duration of the call.
Off — The PIP window is not displayed during the call.
Auto — The PIP window is displayed when a user picks up the
remote.
Chapter 4 - Customizing the VSX System
4 - 7