Polycom VSX Series Administrator's Manual page 51

Connecting and
© Polycom, Inc.
Positioning Speakers to Receive Stereo
You may use your monitor's speakers to receive stereo.
You cannot receive stereo with a VSX 7000 using the system's built-in speaker.
When you set up the system for StereoSurround, the left microphone and speaker
should be on the left from the local room perspective. The system reverses the left
and right channels for the far site, as shown in the following illustration. This
ensures that the sound comes from the appropriate side of the room.
Left
Right
Sending Stereo
To connect an external speaker system and position the speakers to receive
stereo:
1. If you are using the Polycom StereoSurround kit, connect the speakers and
subwoofer as shown in the setup sheet provided with the StereoSurround kit.
If you are using a third-party external speaker system, connect the VSX
system's audio outputs to the external speaker system's CD or auxiliary line
in, and connect speakers to the external speaker system's speaker outputs.
Chapter 2 - Setting Up Your System Hardware
Right
Left
Receiving Stereo
2 - 27