R E A R C A M E R A M I R R O R; T I R E P R E S S U R E M O N I T O R I N G; Dome Lamps - Cadillac ESCALADE 2023 Use & Care Manual

Table of Contents

Advertisement

R E A R C A M E R A M I R R O R ♦
The Rear Camera Mirror
provides a wider, less-
obstructed field of
view than a traditional
mirror to assist when
driving, changing lanes
and checking traffic
conditions.
A. On/Off
Pull or push the lever at the bottom of the mirror to turn the
video display on or off.
B. Selection Control
Press and release the button to select the brightness,
zoom, or tilt setting.
C. Adjustment Controls
Press and release either button to adjust the selected
setting.
Rotate the Rear Wiper control band to the washer position
to clean the Rear Camera Mirror lens and rear window.
See Keys, Doors and Windows in your Owner's Manual.

T I R E P R E S S U R E M O N I T O R I N G

The
Low Tire Pressure light illuminates when one or more
of the vehicle's tires is significantly underinflated. Fill the tires
to the proper tire pressures listed on the Tire and Loading
Information label, located below the driver's door latch. Current
tire pressures can be viewed on the Infotainment Screen.
When inflating a tire, the Tire Fill Alert sounds the horn and
changes the turn signals from flashing to solid when the recom-
mended tire pressure is reached (does not apply to spare tire).
See Vehicle Care in your Owner's Manual.
Optional equipment
L I G H T I N G
INTELLIBEAM
SYSTEM
The IntelliBeam
system automatically
turns the high-beam
headlights on/off
based on traffic
A
C
B
conditions at night.

DOME LAMPS

ADAPTIVE HEADLIGHT SYSTEM
The Adaptive Headlight System uses the high-beam headlights
when possible for the best light distribution. Individual
segments of the high beams are faded out according to the
traffic situation to prevent glaring other road users.
Note: IntelliBeam or the Adaptive Headlight System activates the high-
beam headlights only when driving more than 25 mph.
See Lighting in your Owner's Manual.
19
Press the
button on the end of the lever with the lamp control in the
AUTO or
Headlamps position to turn the system on or
off. A green
indicator displays on the Cluster Display
when the system is on; a blue
the high-beam headlamps are on.
To turn a reading lamp on/off, press the lamp lens.
To turn on/off all reading/dome lamps with the doors closed,
press and hold either reading lamp in the overhead console.
To turn all dome lamps off when the doors are open, press
the
OFF button on the overhead console.
Press the
button on the end of the lever with the lamp
control in the AUTO or
system on or off.
Some equipment shown may not be included in your vehicle.
indicator displays when
Headlamps position to turn the

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents