S E At F E At U R E S - Cadillac ESCALADE 2023 Use & Care Manual

Table of Contents

Advertisement

S E AT F E AT U R E S

FRONT SEAT ADJUSTMENTS
A. Seat Adjustment
B. Seatback Recline
C. Lumbar Support
D. Seat Massage
SET FRONT SEAT MEMORY POSITIONS
With the ignition On or
in Accessory mode:
1. Adjust the driver's
seat, power steering
column and power
outside mirrors
to the desired
positions.
2. Press and release
the SET button on
the driver's door. A beep will sound.
3. Immediately press and hold button 1 or 2 until two beeps
sound. Use the button that matches the Driver Information
Center welcome message indicating driver 1 or 2.
To store seat and power steering column positions for
exiting the vehicle, repeat the steps using the
button.
Optional equipment
B
A
C
D
Exit
RECALL FRONT SEAT MEMORY POSITIONS
Press and hold button 1, 2 or
is reached.
To enable the seat positions to be recalled automatically
when the vehicle is turned On/Off (for exit recall, the
driver's door must be opened), go to Settings > Vehicle >
Seating Position > Seat Entry Memory and Seat Exit
Memory.
2ND-ROW SEAT ADJUSTMENTS
To slide a 2nd-row seat, lift the front lever (E) on the side of
the seat cushion.
To recline a 2nd-row seatback, lift the rear lever (F) on the
side of the seat cushion and push on the seatback.
To fold a 2nd-row
seat, lift the rear
lever (F) on the side
of the seat cushion
or, from the 3rd-row
seat, pull the strap
on the bottom of the
seatback. The
seatback will fold
forward. Lift the
lever or pull the strap again to tumble the seat forward.
To return the seat to the upright position, pull down the
seat and lift the seatback until it locks in place. Slide the
seat rearward by using the lever (E) on the seat cushion.
Note: Do not slide the 2nd-row seat while folded.
See Seats and Restraints in your Owner's Manual.
13
Some equipment shown may not be included in your vehicle.
Exit until the set position
E
F

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents