Philips BJ3.1A LA Manual page 134

8.4 Option Settings
8.4.1 Introduction
The microprocessor communicates with a large number of I
ICs in the set. To ensure good communication and to make
digital diagnosis possible, the microprocessor has to know
which ICs to address. The presence / absence of these specific
ICs (or functions) is made known by the option codes.
Notes:
• After changing the option(s), save them by pressing the OK
button on the RC before the cursor is moved to the left,
select STORE in the SAM root menu and press OK on the
RC.
• The new option setting is only active after the TV is
switched "off" and "on" again with the Mains switch (the
NVM is then read again).
8.4.2 Dealer Options
For dealer options, in SAM select "Dealer options" and then
"Personal options".
Table 8-2 Dealer options
Menu item Subjects
Personal Options Virgin Mode
Autostore Mode
8.4.3 (Service) Options
Select the sub menu's to set the initialization codes (options) of
the set via text menus.
Table 8-3 Service options
Menu-item Subjects
PIP/DS Dual Screen
Data EPG
Display Screen
Clear LCD
Dimming Backlight
Video Repro Picture Processing
Combfilter
Ambient Light
Pacific 3
MOP
Light sensor
Source Selection EXT1 type
EXT2 type
EXT3 type
EXT4 type
HDMI 1
HDMI 2
USB version
Ethernet
VGA
S/PDIF inputs
2
C
Options Description
On TV starts up (once) with a language selection menu after the Mains switch is turned "on" for the
first time (virgin mode)
Off TV does not start up (once) with a language selection menu after the Mains switch is turned "on"
for the first time (virgin mode)
None Determines where the set distracts the information from for the autostore functionality
PDC/VPS
TXT page
PDC/VPS/TXT
Options Description
None no DS
- Electronic Program Guide
"Value" Used screen size, type, and resolution
On / Off Feature present / not present
On / Off Feature present / not present
No Spider / Spider Feature not present / present
None / 2D / 3D
Off / Mono / Stereo/Triple / Quad Inverter not present / one inverter / two inverters / three inverters / four inverters
On Feature present
Off Feature not present
Off / On Sensor active / not active
CVBS RGB
CVBS Y/C RGB P50
YPbPr LR HV
None
None No HDMI
With analogue audio DVI
Without analogue audio HDMI
None No HDMI
With analogue audio DVI
Without analogue audio HDMI
2.0 + CR USB 2.0 in cardreader panel
Off Connector not present
Off
1 connector 1 connector present (in)
Alignments BJ3.1A LA 8. EN 135