Mechanical Installation
October 2018
3.3.2
Special considerations in solids applications
The transmitter should be mounted as close to the center of the tank as possible, but not in the center
of the tank. A general practice is to mount the transmitter at
Figure
Figure 3-4. Transmitter Location in Solids Applications
The radar signal must never be shaded by the inlet nor the injected product, see
Figure 3-5. Install the Transmitter with a Clear and Unobstructed View
20
3-4.
Reference Manual
00809-0100-4026, Rev KC
2
/
tank radius from the tank wall, see
3
Figure 3-5.
Mechanical Installation