Cadillac CT4 2023 Owner's Manual page 153

152 Infotainment System
Brake and Throttle Graphic: Displays
the percentage value of brake and
throttle pedal position from 0 100%.
Steering Angle: The graphic fills from the
center to the left or right depending on
the direction of steering. The numerical
steering angle displays below the graphic.
Active Handling Active Indicator: The
graphic only displays if the active
handling systems are activated.
Performance Traction Management (PTM)
Mode: Displays the current PTM mode.
The options are Wet, Dry, Sport 1, Sport 2,
or Race.
Current Lap Time: Displays the elapsed
lap time if the finish line is defined and
the vehicle has crossed the defined finish
line at least once.
Event Odometer: This displays the
distance driven since the recording began.
Drive Mode: Displays the vehicle s current
drive mode.
Timing:
Displays these vehicle metrics:
Vehicle Speed: Same as Sport.
Engine Revolutions Per Minute (rpm):
Same as Sport.
Transmission State (Current Gear): Same
as Sport.
0 100 km/h (0 60 mph), 0 200 km/h
(0 100 mph), 400 m (1/4 th mi), and 0
200 0 km/h (0 100 0 mph): The timer
starts recording as soon as the vehicle
accelerates. As the vehicle passes each
speed and distance milestone, it is
displayed on the overlay.
Throttle Position: Displays the percentage
of throttle applied from 0 100%.
Active Handling Active Indicator: The
graphic only displays if the active
handling systems are activated.
Lap Timing
Touch Lap Timing on the PDR tab to display
the track selection screen.
Select Custom Track, then Learn to create
a new custom track for lap timing.
Select Custom Track, then Relearn if a
custom track has already been defined
and is available on the storage device.
Only one track can be learned during
each recording session. To learn a new
track, end the current recording and start
a new one.