Table of Contents
Advertisement
System Connections
Right speaker
Right speaker
White line
Black
System Connections (continued)
Setting the AC voltage selector
Check the setting of the AC voltage selector located on the rear
panel before plugging the unit into a wall socket. If necessary, adjust
the selector to correspond to the AC power voltage used in your
area.
Turn the selector with a screwdriver until the appropriate volt-
age number appears in the window (110 V, 127 V, 220 V or 230 V
- 240 V AC).
FM aerial
AM loop aerial
Left speaker
After checking all the connections have been made correctly,
connect the AC power lead to the AC power input socket, then
into the wall socket.
Notes:
AC Plug Adaptor
In areas (or countries) where a wall socket as shown in illustration
is used, connect the unit using the AC plug adaptor supplied with
the unit, as illustrated. The AC plug adaptor is not included in areas
where the wall socket and AC power plug can be directly connected
(see illustration
– 7 –
Left speaker
not supplied
VCR, DVD, etc.
not supplied
To a wall socket
Connecting the AC power lead
Unplug the AC power lead from the wall socket if the unit will not
be in use for a prolonged period of time.
Never use a power lead other than the one supplied. Use of a
power lead other than the one supplied may cause an elec-
tric shock or fire.
).
XL-3000W
MD recorder
Wall socket
1
2
Advertisement
Table of Contents
