Steps
1. Connect the eDP cable to the connector on the camera module.
2. Adhere the eDP cable to the display back cover.
3. Adhere the conductive tape and route the eDP cable to the display back cover.
Next steps
1. Install the
display
panel.
2. Install the
display
bezel.
3. Install the
display
assembly.
4. Install the
base
cover.
5. Install the
microSD
card.
6. Install the
SIM
card.
7. Follow the procedure in
Sensor board
Removing the sensor board
Prerequisites
1. Follow the procedure in
2. Remove the
SIM
card.
98
Removing and installing components
after working inside your
before working inside your
computer.
computer.