Installing The Smart Card Reader - Dell P104F Service Manual
Hide thumbs
Also See for P104F:
- Service manual (147 pages) ,
- Technical manualbook (57 pages) ,
- Setup and specifications (33 pages)
Table of Contents
Advertisement
Steps
1. Open the latch and disconnect the smart card reader cable from the connector on the USH board.
2. Remove the two (M2x3) screws that secure the smart card reader to the palm-rest assembly.
3. Lift the smart card reader off the palm-rest assembly.
Installing the smart card reader
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the smart card reader and provides a visual representation of the installation
procedure.
72
Removing and installing components
Advertisement
Table of Contents
