Table of Contents
Advertisement
How to detach the stand and the base
1. Prepare the monitor and area.
Turn off the monitor and the power before unplugging the
power cable. Turn off the computer before unplugging the
monitor signal cable.
2. Remove the I/O cover. (EX270QM only)
Remove the I/O cover from its bottom as illustrated. You
might want to tilt the monitor to remove it easily. Unplug
all cables carefully.
Protect the monitor and screen by clearing a flat open area
on your desk and placing a soft item like a towel on the
desk for padding, before laying the screen face down on a
flat clean padded surface.
Please be careful to prevent damage to the monitor. Placing the
screen surface on an object like a stapler or a mouse will crack
the glass or damage the LCD substrate voiding your warranty.
Sliding or scraping the monitor around on your desk will scratch
or damage the monitor surround and controls.
3. Remove the monitor stand.
While pressing and holding the VESA mount release button
1
(
), detach the stand from the monitor (
4. Remove the monitor base.
Release the screw on the bottom of the monitor base and
detach the monitor base as illustrated.
In case you intend to use your monitor on the stand in the
future, please keep the monitor base and monitor stand
somewhere safe for future use.
2
3
and
).
24
3
1
2
1
2
Advertisement
Table of Contents
