74
I see vertical lines in all four directions on the screen, or Colors are blurred
when I try to connect to HDMI.
•
(Q. Settings)
Set [Just Scan] to [Off].
[Just Scan] shows you the original image as it is. You may see noise in all four
directions on the screen if the signal contains noise.
I don't see anything, or the image keeps flickering when i try to connect the
HDMI® cable.
•
Check whether your HDMI® cable is compliant with the specifications. You
may experience flickering or a blank screen if the HDMI® cable is faulty (bent,
broken).
•
Make sure that the cable is correctly connected to the port. Bad or loose contact
may cause display problems on the screen.
The screen looks too dim or dark.
•
(Q. Settings)
Mode]
Switch [Picture Mode] to your desired picture mode. ([Standard], etc.)
This applies to the current input mode only.
•
(Q. Settings)
Switch [Energy Saving] to [Minimum].
The screen is in black and white or displaying strange Colors.
•
Check the input mode or cable connection.
•
Go to
to choose the connected input.
[Picture]
[Aspect Ratio Settings]
[Picture]
[Picture Mode Settings]
[Picture]
[Energy Saving]
[Just Scan]
[Picture