Advertisement
transfer mode) before launching ISL_CAM. (Refer to your
camera's operating manual for information on how to set
the camera for file transfer.) If you exit ISL_CAM, you will
need to reset the camera to file transfer mode if you wish to
reinitiate a file transfer.
Do not turn off the camera during data transmission. If
power to the camera is disconnected while transferring
images from or to the camera, the memory inside the
camera may be destroyed. Therefore, be sure to use the A/C
adapter while performing any transfers.
4. Camera Selection/Setup In ISL_CAM
You must set up your selected camera before file transfer. The follow-
ing steps will guide you in setting up the camera:
Windows
After installation, you can find the ISL_CAM SELECT utility
in the Start Menu (Start Menu: Programs: Pentax.) You will
also find a TWAIN image import driver available to your
applications that support TWAIN.
To open the ISL_CAM utility directly:
Click "ISL_CAM SELECT" on Windows 3.1, or
"ISL_CAM [32 bit] (SELECT)" on Windows 95/NT.
To open ISL_CAM through another application using the
TWAIN driver (you must refer to your software's documenta-
tion for how to acquire images through TWAIN import):
You will be prompted to select input source. Select
"TWAIN 16 Data Source for ISL_CAM" (for Windows
3.1), or "TWAIN 32 Data Source for ISL_CAM" (for
-7-
Advertisement
