Jet Wash - Yamaha 210 FSH 2019 Operator's Manual

Equipment operation

Jet wash

WARNING
The jet wash system must be used only by
a passenger who is not operating the boat.
While the jet wash system is being used,
the boat operator must attach the engine
shut-off cord (lanyard) to their PFD and
scan constantly for people, objects, and
other watercraft.
NOTICE
 If the jet wash system will not be used
for an extended period, turn the shut-off
valve to the closed position. To prevent
water from freezing in the jet wash hos-
es when storing the boat in freezing
temperatures, drain the water from the
hoses. For more information, contact a
Yamaha Boat Dealer. Before using the
jet wash system, make sure that the
shut-off valve is in the open position. If
water leaks from the hose fitting or coil
hose or if you notice any other problem,
turn the shut-off valve to the closed po-
sition immediately.
 While the jet wash system is being used,
scan constantly for people, objects, and
other watercraft. Otherwise, the boat
could collide with another watercraft, a
dock, or other obstacle.
 210 FSH Deluxe/210 FSH: Before using
the jet wash system, make sure that the
anchor light socket is closed. If the an-
chor light socket is not closed and water
enters the socket, the socket could mal-
function.
The hose fitting for the coil hose is located on
the deck near the jump seat (starboard).
70
1
1 Hose fitting
To use the jet wash:
(1) Connect the coil hose to the hose fitting.
1
1 Coil hose
2 Hose fitting
(2) Start the engines. (See page 95.)
(3) Push the jet wash switch.
1 Jet wash switch
2
1
JET
WASH