Liniality Adjstment/Confirmation (4:3 Mode) - Panasonic TX-29P800R-IRAN Service Manual

TX-29P800R-IRAN
5.4. V Liniality Adjstment/Confirmation (4:3 Mode)
5.4.1. 75i V-Linear Adjustment
1. Receive PAL monoscope pattern (E10) (UTF:E-5)
(Middle and south america model : Colour dac=0)
2. Set scan mode to 75/8331 by remote control key.
3. Confirm V-linear (75i / 4:3) as to the balance of circle.
If need, adjust V-linear (75i / 4:3).
5.4.2. 100i V-Linear Adjustment
1. Receive PAL monoscope pattern (E10) (UTF:E-5)
(Middle and south america model : Colour dac=0)
2. Set scan mode to 100 Hz by remote control key.
3. Confirm V-linear (100i / 4:3) as to the balance of circle.
If need, adjust V-linear (100i / 4:3).
5.4.3. 50p V-Linear Adjustment
1. Receive PAL monoscope pattern (E10) (UTF : E-5)
(Middle and south america : Colour dac=0)
2. Set scan mode to progressive by remote control key.
3. Confirm V-linear (50p / 4:3) as to the balance of circle.
If need, adjust V-linear (50p / 4:3).
5.4.4. 60p V-Linear Adjustment
1. Receive NTSC monoscope pattern (J11) (UTF:JA-9)
(Middle and south america model:Colour dac
2. Confirm V-linear (60p / 4:3) as to the balance of circle.
If need, adjust V-linear (60p / 4:3).
20