Table of Contents
Advertisement
8.6.
Remove the A-Board
1. Remove the Tuner unit. (See section 8.5.)
2. Remove the screws (×2
8.7.
Remove the Speakers
1. Unlock the cable clampers to free the cable.
2. Disconnect the Relay connector.
3. Remove the screws (×2
ers (L, R).
) and remove the A-Board.
each) and remove the Speak-
8.8.
Remove the SU-Board
1. Disconnect the flexible cables (SU1, SU2, SU3 and SU4)
connected to the SU-Board.
2. Disconnect the flexible cable (SU11-SD11) and the bridge
connector (SC41-SU41).
3. Remove the screws (×2
Board.
8.9.
Remove the SD-Board
1. Disconnect the flexible cables (SD1, SD2, SD3 and SD4)
connected to the SD-Board.
2. Disconnect the flexible cable (SU11-SD11) and the bridge
connectors (SC42-SD42 and SC46-SD46).
3. Remove the screws (×2
Board.
23
, ×2
) and remove the SU-
, ×2
) and remove the SD-
Advertisement
Table of Contents
