Table of Contents
Advertisement
Remote control operation:
Once paired with smartphone/Tablet, users may perform the following functions
on iOS devices with Bluetooth 3.0 and later and Android 4.0 or later.
These remote functions do not apply to the Corvette radio.
Bluetooth pairing and connection
This process must be carried out upon initial install after which the A2DIY-C5CD
will automatically reconnect with paired phone upon entering vehicle.
1.
Go to smartphone settings and enable Bluetooth
2.
Smartphone will automatically begin searching for devices.
3.
Select Bluetooth name below, tap "Connect"
Note: Supports multiple phone pairings but connects to one phone at a time.
If for some reason phone fails to pair, ensure no other has paired to module in
such case you must unpair that device in other to pair another.
Warning:
Caller ID, song text is not shown on radio screen. Operate
Bluetooth device via media button, VR (voice recognition) or device built-in
controls. Use radio buttons to adjust playback level and tone controls
(e.g., Bass/treble etc.)
Advertisement
Table of Contents
