Table of Contents
Advertisement
3. Connect installation harness 20-pin plug (black/gray) (See Fig. 3) to
radio 20-pin socket (See Fig. 1)
Required 12-disc CD changer
Playback options:
(make selection at checkout)
Warning: Regardless of playback option, a functioning 12-disc changer is
required. Changer remains connected and magazine must have at
least one "Disc" which will spin continuously while in Bluetooth
mode.
These options are available and selected at checkout:
1. Retain changer playback (default)
2. Auxiliary input (instead of changer playback)
1. Retain CD changer playback
This is the default playback option that allows retention (use) of the 12-
disc changer in trunk or hatch and if selected proceed to installation
step 4.
2. AUX input
(instead of changer playback)
This option allows users to connect and play a portable audio device (e.g.,
sat radio, Alexa, iPod, Mp3 etc.) forfeiting 12-disc changer playback,
:
:
Warning: With this option, the required 12-disc CD changer remains
connected but will no longer play. Magazine must have at least one
"DISC"
1.
Connect included 3.5mm audio cable (See Fig. 4) to "AUX" jack (See Fig.
5)
2. Route audio cable plug to audio device location (within 3 ft.)
Proceed to installation step 4.
3.
Fig. 4
3.5male to male audio cable
Fig. 5
Install microphone to headliner, sun visor etc.; (See Fig. 6)
4.
Route cable down pillar, under dashboard and into radio cavity.
5.
Connect microphone plug to module "MIC" input.
6.
Wind noise (Convertibles) will negatively affect phone audio. Users are
advised to install microphone away from wind/ventilation ducts etc.
Advertisement
Table of Contents
