Table of Contents
Advertisement
Visor microphone
Optional USB type-C charging kit
Optional USB type-C charger can be added to the A2DIY-C5CD Kit. Should you
decide to add it, we suggest one of 3 installation options:
A. Flush to dash/panel requires drilling a ¾" hole
B. Flush with support bracket (Mount terminal wherever your installation
demands without drilling)
C. Freestanding- (default)
Flush to dash/panel
A.
1.
Drill a ¾" hole in the dash/panel using a step drill bit or equivalent
(See Fig. 10)
Fig. 6
(charge only)
(drilling required)
Fig. 10
Step drill bit
2. Insert cable through hole created in step 1
3. On module installation harness locate charger Fig. 11)
4. Connect cable from step 2 to charger USB type C- port
Fig. 11
5. Snap USB head to opening until flush with surface (See Fig. 12)
Fig. 12
Tuck and secure any extra wire from moving parts and test operation
Advertisement
Table of Contents
